Get New 2024 Fortinet exam NSE5_FAZ-7.2 Dumps Bundle On flat Updated Dumps!
Full NSE5_FAZ-7.2 Practice Test and 138 unique questions with explanations waiting just for you, get it now!
NEW QUESTION # 20
What statements are true regarding disk log quota? (Choose two)
- A. The FortiAnalyzer automatically sets the disk log quota based on the device.
- B. The FortiAnalyzer stops logging once the disk log quota is met.
- C. The FortiAnalyzer disk log quota is configurable, but has a minimum o 100mb a maximum based on the reserved system space.
- D. The FortiAnalyzer can overwrite the oldest logs or stop logging once the disk log quota is met.
Answer: C,D
NEW QUESTION # 21
Which two statements are true regarding fabric connectors? (Choose two.)
- A. Fabric connectors allow to save storage costs and improve redundancy.
- B. Configuring fabric connectors to send notification to ITSM platform upon incident creation Is more efficient than third-party information from the FortiAnalyzer API.
- C. Cloud-Out connections allow you to send real-time logs to pubic cloud accounts like Amazon S3, Azure Blob , and Google Cloud.
- D. Storage connector service does not require a separate license to send logs to cloud platform.
Answer: B,C
NEW QUESTION # 22
A playbook contains five tasks in total. An administrator runs the playbook and four out of five tasks finish successfully, but one task fails. What will be the status of the playbook after it is run?
- A. Running
- B. Failed
- C. Success
- D. Upstream_failed
Answer: B
NEW QUESTION # 23
Which two statements are true regarding FortiAnalyzer operating modes? (Choose two.)
- A. By deploying different FortiAnalyzer devices with collector and analyzer mode in a network, you can improve the overall performance of log receiving, analysis, and reporting
- B. When in collector mode, FortiAnalyzer collects logs from multiple devices and forwards these logs in the original binary format.
- C. Collector mode is the default operating mode.
- D. When in collector mode. FortiAnalyzer supports event management and reporting features.
Answer: A,B
Explanation:
Reference:
https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/312644/analyzer-collector-collaboration
NEW QUESTION # 24
Why should you use an NTP server on FortiAnalyzer and all registered devices that log into FortiAnalyzer?
- A. To improve DNS response times
- B. To properly correlate logs
- C. To resolve host names
- D. To use real-time forwarding
Answer: B
NEW QUESTION # 25
What purposes does the auto-cache setting on reports serve? (Choose two.)
- A. To automatically update the hcache when new logs arrive
- B. To reduce the log insert lag rate
- C. To reduce report generation time
- D. To provide diagnostics on report generation time
Answer: A,C
NEW QUESTION # 26
What must you consider when using log fetching? (Choose two.)
- A. The archive logs retrieved from the server become archive logs in the client.
- B. You can use filters to include only logs from a single device.
- C. The fetch client can retrieve logs from devices that are not added to its local Device Manager
- D. The fetching profile must include a user with the Super_User profile.
Answer: B,D
NEW QUESTION # 27
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?
- A. Hot swap the disk.
- B. Run execute format disk to format and restart the FortiAnalyzer device.
- C. Shut down FortiAnalyzer and replace the disk
- D. There is no need to do anything because the disk will self-recover.
Answer: A
Explanation:
https://help.fortinet.com/fa/faz50hlp/56/5-6-2/FMG-FAZ/0700_RAID/0800_Swapping%20Disks.htm#:~:text=If%20a%20hard%20disk%20on,to%20exchanging%20the%20hard%20disk.
NEW QUESTION # 28
Consider the CLI command:
What is the purpose of the command?
- A. To encrypt log communications
- B. To add a unique tag to each log to prove that it came from this FortiAnalyzer
- C. To add a log file checksum
- D. To add the MD5 hash value and authentication code
Answer: C
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/cli-reference/849211/global
NEW QUESTION # 29
You are using RAID with a FortiAnalyzer that supports software RAID, and one of the hard disks on FortiAnalyzer has failed.
What is the recommended method to replace the disk?
- A. Clear all RAID alarms and replace the disk while FortiAnalyzer is still running
- B. Downgrade your RAID level, replace the disk, and then upgrade your RAID level
- C. Perform a hot swap
- D. Shut down FortiAnalyzer and then replace the disk
Answer: D
Explanation:
https://community.fortinet.com/t5/FortiAnalyzer/Technical-Note-How-to-swap-Hard-Disk-on-FortiAnalyzer/ta-p/194997?externalID=FD41397#:~:text=If%20a%20hard%20disk%20on,process%20known%20as%20hot%20swapping
NEW QUESTION # 30
Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with SSL? (Choose two.)
- A. SSL communications are auto-negotiated between the two devices.
- B. SSL encryption levels are globally set on FortiAnalyzer.
- C. SSL is the default setting.
- D. FortiAnalyzer encryption level must be equal to, or higher than, FortiGate.
- E. SSL can send logs in real-time only.
Answer: B,C
NEW QUESTION # 31
For which two SAML roles can the FortiAnalyzer be configured? (Choose two.)
- A. Service provider
- B. Identity provider
- C. Identity collector
- D. Principal
Answer: A,B
Explanation:
Reference:
20the%20identity%20provider%20(IdP,external%20identity%20provider%20is%20available.
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/981386/saml-admin-authentication In FortiAnalyzer, SAML can be enabled across all Security Fabric devices, enabling smooth movement between devices for the administrator by means of single sign-on (SSO).
FortiAnalyzer can play the role of the identity provider (IdP), the service provider (SP), or Fabric SP, when an external identity provider is available.
FortiAnalyzer_7.0_Study_Guide-Online pag. 48
NEW QUESTION # 32
What is the main purpose of using an NTP server on FortiAnalyzer and all of its registered devices?
- A. Log collection
- B. Log correlation
- C. Real-time forwarding
- D. Host name resolution
Answer: B
NEW QUESTION # 33
What is the purpose of output variables?
- A. To store playbook execution statistics
- B. To use the output of the previous task as the input of the current task
- C. To display details of the connectors used by a playbook
- D. To save all the task settings when a playbook is exported
Answer: B
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 242: Output variables allow you to use the output from a preceding task as an input to the current task.
"Output variables allow you to use the output from a preceding task as an input to the current task." FortiAnalyzer_7.0_Study_Guide-Online page 242
NEW QUESTION # 34
Refer to the exhibit.
Based on the partial outputs displayed, which devices can be members of a FortiAnalyzer Fabric?
- A. FortiAnalyzer2 and FortiAnalyzer3
- B. FortiAnalyzerl and FortiAnalyzer3
- C. All devices listed can be members
- D. FortiAnalyzer1 and FortiAnalyzer2
Answer: C
NEW QUESTION # 35
Which statement is true regarding Macros on FortiAnalyzer?
- A. Macros are useful in generating excel log files automatically based on the reports settings.
- B. Macros are ADOM specific and each ADOM will have unique macros relevant to that ADOM.
- C. Macros are supported only on the FortiGate ADOM.
- D. Macros are predefined templates for reports and cannot be customized.
Answer: B
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 283: Note that macros are ADOM-specific and supported in FortiGate and FortiCarrier ADOMs only.
NEW QUESTION # 36
Which statement is true when you are upgrading the firmware on an HA cluster made up of two FortiAnalyzer devices?
- A. First, upgrade the secondary device, and then upgrade the primary device.
- B. You can perform the firmware upgrade using only a console connection.
- C. You can enable uninterruptible-upgrade so that the normal FortiAnalyzer operations are not interrupted while the cluster firmware upgrades.
- D. Both FortiAnalyzer devices will be upgraded at the same time.
Answer: A
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 64: To upgrade FortiAnalyzer HA cluster firmware:
1. Log in to each secondary device.
2. Upgrade the firmware of all secondary devices.
3. Wait for the upgrades to complete and verify that all secondary devices joined the cluster.
4. Verify that logs on all secondary devices are synchronized with the primary device.
5. Upgrade the primary device.
https://docs.fortinet.com/document/fortianalyzer/7.2.0/upgrade-guide/262607/upgrading-fortianalyzer-firmware
NEW QUESTION # 37
......
Reduce Your Chance of Failure in NSE5_FAZ-7.2 Exam: https://testinsides.vcedumps.com/NSE5_FAZ-7.2-examcollection.html
