Nov-2022 Fortinet NSE6_FNC-8.5 Actual Questions and 100% Cover Real Exam Questions
NSE6_FNC-8.5 Free Exam Questions and Answers PDF Updated on Nov-2022
NEW QUESTION 14
Refer to the exhibit.
If you are forcing the registration of unknown (rogue) hosts, and an unknown (rogue) host connects to a port on the switch, what will occur?
- A. The host is moved to VLAN 111.
- B. No VLAN change is performed
- C. The host is disabled.
- D. The host is moved to a default isolation VLAN.
Answer: C
Explanation:
Explanation
The ability to limit the number of workstations that can connect to specific ports on the switch is managed with Port Security. If these limits are breached, or access from unknown workstations is attempted, the port can do any or all of the following: drop the untrusted data, notify the network administrator, or disable the port.
NEW QUESTION 15
How are logical networks assigned to endpoints?
- A. Through network access policies
- B. Through Layer 3 polling configurations
- C. Through FortiGate IPv4 policies
- D. Through device profiling rules
Answer: C
Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/9819/viewing-and-controlling- network-risks-via-topology-view
NEW QUESTION 16
Which agent is used only as part of a login script?
- A. Mobile
- B. Dissolvable
- C. Passive
- D. Persistent
Answer: D
Explanation:
If the logon script runs the logon application in persistent mode, configure your Active Directory server not to run scripts synchronously.
Reference: https://www.websense.com/content/support/library/deployctr/v76/ init_setup_creating_and_running_logon_agent_script_deployment_tasks.aspx
NEW QUESTION 17
With enforcement for network access policies and at-risk hosts enabled, what will happen if a host matches a network access policy and has a state of "at risk"?
- A. The host is provisioned based on the default access defined by the point of connection.
- B. The host is provisioned based on the network access policy.
- C. The host is administratively disabled.
- D. The host is isolated.
Answer: B
NEW QUESTION 18
How are logical networks assigned to endpoints?
- A. Through network access policies
- B. Through Layer 3 polling configurations
- C. Through FortiGate IPv4 policies
- D. Through device profiling rules
Answer: C
NEW QUESTION 19
Which agent is used only as part of a login script?
- A. Mobile
- B. Dissolvable
- C. Passive
- D. Persistent
Answer: D
NEW QUESTION 20
Where do you look to determine when and why the FortiNAC made an automated network access change?
- A. The Event view
- B. The Admin Auditing view
- C. The Connections view
- D. The Port Changes view
Answer: D
NEW QUESTION 21
Which connecting endpoints are evaluated against all enabled device profiling rules?
- A. Rogues devices, each time they connect
- B. Rogues devices, only when they connect for the first time
- C. All hosts, each time they connect
- D. Known trusted devices each time they change location
Answer: A
NEW QUESTION 22
Which two methods can be used to gather a list of installed applications and application details from a host? (Choose two.)
- A. Portal page on-boarding options
- B. Agent technology
- C. Application layer traffic inspection
- D. MDM integration
Answer: A,D
Explanation:
Explanation/Reference: https://developer.apple.com/business/documentation/MDM-Protocol-Reference.pdf
https://docs.oracle.com/en/middleware/idm/identity-governance/12.2.1.3/omusg/managing-application- onboarding.html#GUID-4D0D5B18-A6F5-4231-852E-DB0D95AAE2D1
NEW QUESTION 23
Which two of the following are required for endpoint compliance monitors? (Choose two.)
- A. Security rule
- B. Persistent agent
- C. Custom scan
- D. Logged on user
Answer: A,C
NEW QUESTION 24
Where are logical network values defined?
- A. In the port properties view of each port
- B. In the security and access field of each host record
- C. In the model configuration view of each infrastructure device
- D. On the profiled devices view
Answer: C
NEW QUESTION 25
What would happen if a port was placed in both the Forced Registration and the Forced Remediation port groups?
- A. Only rogue hosts would be impacted.
- B. Only at-risk hosts would be impacted.
- C. Both enforcement groups cannot contain the same port.
- D. Both types of enforcement would be applied.
Answer: C
Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortinac/8.3.0/administration-guide/837785/system-groups
NEW QUESTION 26
Which system group will force at-risk hosts into the quarantine network, based on point of connection?
- A. Forced Isolation
- B. Forced Quarantine
- C. Forced Remediation
- D. Physical Address Filtering
Answer: C
Explanation:
A remediation plan is established, including a forensic analysis and a reload of the system. Also, users are forced to change their passwords as the system held local user accounts.
NEW QUESTION 27
What causes a host's state to change to "at risk"?
- A. The logged on user is not found in the Active Directory.
- B. The host is not in the Registered Hosts group.
- C. The host has failed an endpoint compliance policy or admin scan.
- D. The host has been administratively disabled.
Answer: A
NEW QUESTION 28
During the on-boarding process through the captive portal, why would a host that successfully registered remain stuck in the Registration VLAN? (Choose two.)
- A. There is another unregistered host on the same port.
- B. The ports default VLAN is the same as the Registration VLAN.
- C. Bridging is enabled on the host
- D. The wrong agent is installed.
Answer: A,D
Explanation:
Scenario 4: NAT detection disabled, using endpoint compliance policy and agent.
NEW QUESTION 29
Which connecting endpoints are evaluated against all enabled device profiling rules?
- A. Rogues devices, each time they connect
- B. Rogues devices, only when they connect for the first time
- C. All hosts, each time they connect
- D. Known trusted devices each time they change location
Answer: A
Explanation:
FortiNAC process to classify rogue devices and create an organized inventory of known trusted registered devices.
NEW QUESTION 30
In an isolation VLAN. which three services does FortiNAC supply? (Choose three.)
- A. SMTP
- B. Web
- C. DNS
- D. NTP
- E. DHCP
Answer: B,C,E
NEW QUESTION 31
Which agent is used only as part of a login script?
- A. Passive
- B. Mobile
- C. Persistent
- D. Dissolvable
Answer: A
Explanation:
If the logon script runs the logon application in persistent mode, configure your Active Directory server not to run scripts synchronously.
NEW QUESTION 32
Which three communication methods are used by the FortiNAC to gather information from, and control, infrastructure devices? (Choose three)
- A. SMTP
- B. SNMP
- C. DCLI
- D. RADIUS
- E. FTP
Answer: B,D,E
Explanation:
Explanation
Set up SNMP communication with FortiNAC
RADIUS Server that is used by FortiNAC to communicate
FortiNAC can be configured via CLI to use HTTP or HTTPS for OS updates instead of FTP.
NEW QUESTION 33
During the on-boarding process through the captive portal, why would a host that successfully registered remain stuck in the Registration VLAN? (Choose two.)
- A. There is another unregistered host on the same port.
- B. The ports default VLAN is the same as the Registration VLAN.
- C. Bridging is enabled on the host
- D. The wrong agent is installed.
Answer: B,D
Explanation:
Explanation
Scenario 4: NAT detection disabled, using endpoint compliance policy and agent.
NEW QUESTION 34
In which view would you find who made modifications to a Group?
- A. The Alarms view
- B. The Event Management view
- C. The Admin Auditing view
- D. The Security Events view
Answer: D
NEW QUESTION 35
Which three communication methods are used by the FortiNAC to gather information from, and control, infrastructure devices? (Choose three)
- A. SMTP
- B. DCLI
- C. FTP
- D. RADIUS
- E. OSNMP
Answer: A,B,C
NEW QUESTION 36
By default, if more than 20 hosts are seen connected on a single port simultaneously, what will happen to the port?
- A. The port is switched into the Dead-End VLAN.
- B. The port becomes a threshold uplink.
- C. The port is disabled.
- D. The port is added to the Forced Registration group.
Answer: C
NEW QUESTION 37
Which three circumstances trigger Layer 2 polling of infrastructure devices? (Choose three.)
- A. A matched security policy
- B. Scheduled poll timings
- C. A failed Layer 3 poll
- D. Linkup and Linkdown traps
- E. Manual polling
Answer: B,C
NEW QUESTION 38
In a wireless integration, how does FortiNAC obtain connecting MAC address information?
- A. Link traps
- B. End station traffic monitoring
- C. RADIUS
- D. MAC notification traps
Answer: D
NEW QUESTION 39
......
Aruba Networks Certified: Mobility Associate-Professional Exam Certified Professional salary
The estimated average salary of Network Security Specialist Fortinet NSE6_FNC-8.5 Professional Exam is listed below:
- Europe: 88,032 EURO
- United States: 100,146 USD
- India: 7,199,4 INR
- England: 71,460 POUND
These salaries are calculated at the time of writing according to the currency rates.
Fortinet NSE6_FNC-8.5 Real 2022 Braindumps Mock Exam Dumps: https://testinsides.vcedumps.com/NSE6_FNC-8.5-examcollection.html
