Buy Latest Oct 17, 2025 SMI300XE Exam Q&A PDF - One Year Free Update
Download the Latest SMI300XE Dump - 2025 SMI300XE Exam Questions
NEW QUESTION # 11
In the IPMI Dashboard, how can the health event log help you identify a failure with a component like a fan or power supply?
- A. The red severity status identifies failed components in the log.
- B. The purple status indicator in the IPMI Dashboard indicates failures.
- C. In IPMI under Configuration, configure a new fan.
- D. The blades will be turning a bright orange.
Answer: A
Explanation:
TheIPMI Dashboard health event loghelpsidentify component failuresusing ared severity status indicator
. If a fan or power supply fails, theevent log will mark it as a red alert, allowing users to take corrective action.
* Option A (Correct):Red severity status in theevent logsignals a failed component.
* Option B (Incorrect):Fansdo not change colorswhen failing.
* Option C (Incorrect):There is nopurple status indicatorin IPMI for failures.
* Option D (Incorrect):You cannot configure a new fan inIPMI under Configuration; you must replace a failed fan.
NEW QUESTION # 12
What is the main reason the AGFHC tool is not functioning properly?
- A. CPU 2 is missing and the AGFHC requires 2 CPUs.
- B. Missing 1 DIMM in the system.
- C. PSU needs to be reseated.
- D. Missing 1 or more GPUs in the system.
Answer: A
Explanation:
TheAGFHC tool requires a dual-CPU setupto function properly. IfCPU 2 is missing, the toolfails to operate correctly.
* Option A (Incorrect):Thetool does not depend on DIMM configuration.
* Option B (Incorrect):Missing GPUscan cause errors, butthe tool can still function.
* Option C (Correct):AGFHC requires both CPUsto be installed.
* Option D (Incorrect):PSU reseating isnot requiredfor AGFHC operation.
NEW QUESTION # 13
If a GPU is not detected in the IPMI GUI reports, what would be the next step to recover the missing GPU?
- A. Turn off the server, then try reseating the GPU and heatsink, turn on the server, and verify in IPMI GUI that the GPU has returned.
- B. Turn off the server and reseat the motherboard tray.
- C. While powered on, remove the GPU tray, and remove all power connectors and fan connectors from the baseboard and then reseat the connectors.
- D. Press the GPU button on the rear of the server for 5 seconds to reinitialize the GPU tray.
Answer: A
Explanation:
When a GPU is not detected in theIPMI GUI reports, the recommended recovery method is topower off the system, reseat the GPU and heatsink, then power it back on and check the IPMI GUI for detection. This process ensures that the GPU is properly connected and making full contact with the system board.
* Option A (pressing a GPU button for 5 seconds)is incorrect because there is no dedicated reinitialization button for GPU detection in Supermicro MI300X systems.
* Option B (removing the GPU tray while powered on)is not advisable as it could cause damage to components.
* Option D (reseating the motherboard tray)is unnecessary, as the issue is likely limited to GPU connectivity rather than a full system board issue.
* Option C (powering off the system, reseating the GPU, and verifying in IPMI GUI)follows proper troubleshooting guidelines as documented in Supermicro'stroubleshooting and system health monitoring sections.
NEW QUESTION # 14
Which of the following are important safety precautions when removing the GPU tray?
- A. For your own safety, and the safety of the system, two people should remove the tray which weighs more than 70 pounds.
- B. All of the above.
- C. Unnecessary movement can damage the fans below the GPU tray.
- D. Keep the tray straight to prevent it from tilting up or down, which can damage the upper and lower portion of the chassis.
Answer: B
Explanation:
Whenremoving the GPU trayin anMI300X system, the following precautions must be taken:
* Two people should remove the trayas itweighs over 70 pounds, making it unsafe for one person to handle.
* Keeping the tray straightprevents it fromtilting, which candamage the chassis components.
* Unnecessary movement can damage cooling fansdirectly beneath the GPU tray.
Since all the above precautions arecritical for safe removal, thecorrect answer is D (All of the above).
NEW QUESTION # 15
What tool is needed to remove the GPU in the MI300X system?
- A. Security Torx Bit
- B. Phillips Head Screwdriver
- C. T20 Torx Bit
- D. T15 Torx Bit
Answer: D
Explanation:
TheGPU in the MI300X systemis secured withT15 Torx screws, requiring aT15 Torx Bitfor removal.
* Option A (Incorrect):T20 Torx Bit istoo largefor GPU screws.
* Option B (Incorrect):Security Torx Bit isnot requiredfor standard GPU removal.
* Option C (Correct):T15 Torx Bit is the correct toolfor removing GPU screws.
* Option D (Incorrect):Phillips Head Screwdriversdo not fit the GPU screws.
NEW QUESTION # 16
When working on the GPU tray, where should you place it to ensure a safe work environment?
- A. A flat surface
- B. On top of the chassis
- C. On a cardboard box that may or may not support the weight of the tray
- D. On the floor where everyone is walking by
Answer: A
Explanation:
When handling theGPU tray, it should be placed ona flat, stable surfacetoprevent damage and ensure safety.
* Option B (Correct):Aflat surfaceprovides stability and preventsaccidental damage or tipping.
* Option A (Incorrect):Placing the trayon top of the chassiscan cause it tofall and sustain damage.
* Option C (Incorrect):Thefloor is unsafedue tofoot traffic, riskingaccidental damage.
* Option D (Incorrect):Acardboard box may not support the tray's weight, making itunstable.
NEW QUESTION # 17
The AGFHC Tool is intended for use exclusively by specific users. Who are those users? Choose 2 answers.
- A. VARs / Resellers
- B. Customers
- C. SMC Partners
- D. Internal SMC Employees
Answer: A,D
Explanation:
TheAGFHC Toolis specifically designed forSupermicro's internal employeesandauthorized resellers (VARs). These users require access to diagnostic and firmware update tools that are restricted totrained personnel.
* Option A (Correct):Internal Supermicro employeesuse this tool for system maintenance and diagnostics.
* Option D (Correct):VARs (Value-Added Resellers)are authorized to use the tool forcustomer support and system integration.
* Option B (Incorrect):GeneralSMC partners do not have accessto AGFHC.
* Option C (Incorrect):End customers do not have accessto this tool.
NEW QUESTION # 18
What information is shown in the IPMI storage monitoring section?
- A. Severity of health events
- B. Overheating issues
- C. Attached storage devices
- D. The motherboard
Answer: C
Explanation:
TheIPMI storage monitoring sectionprovides information aboutattached storage devices.
* Option A (Incorrect):IPMI doesnot display motherboard detailsin this section.
* Option B (Incorrect):Overheating issuesare logged separatelyin the event logs.
* Option C (Correct):IPMI storage monitoring tracks attached storage devices.
* Option D (Incorrect):Severity of health eventsis found in system logs, not storage monitoring.
NEW QUESTION # 19
When replacing a failed GPU, what is the proper torque driver setting for tightening the GPU screws?
- A. 4.2 in-lbf
- B. 5.3 Nm
- C. 9.5 in-lbf
- D. 6-8 in-lbf
Answer: D
Explanation:
Thecorrect torque setting for GPU screwsin anMI300X systemis6-8 in-lbf. This ensures asecure fit without overtightening, which could damage the GPU.
* Option C (Correct):6-8 in-lbf isthe recommended torquefor securing GPU screws.
* Option A (Incorrect):4.2 in-lbf istoo low, leading to loose screws.
* Option B (Incorrect):9.5 in-lbf istoo high, risking damage to the GPU mounting.
* Option D (Incorrect):5.3 Nm isnot used for GPU mounting screws.
NEW QUESTION # 20
How many people are required to safely remove the GPU tray from the MI300X?
- A. 2 people
- B. 10 people
- C. 1 person
- D. 6 people
Answer: A
Explanation:
Tosafely remove the GPU trayfrom theMI300X system,two peopleare required.
* Option A (Incorrect):One personcannot safely removethe tray as it is too heavy (~70 lbs).
* Option B (Incorrect):Six people are unnecessary for this task.
* Option C (Correct):Two peoplearerecommended by Supermicroto ensure safe removal.
* Option D (Incorrect):Ten people are excessive and impractical.
Thus,the correct answer is C (2 people).
NEW QUESTION # 21
Which 2 ROCm commands should you run to gather AMD GPU information from the server?
- A. sudo rocm-gpu, sudo rocm-baseboardgpu
- B. sudo rocm-csv, and sudo rocm-amd.bug.txt
- C. sudo rocm-smi -a, and sudo rocm-smi
- D. sudo rockm-smc, and sudo rockm-bug.report.txt
Answer: C
Explanation:
TheROCm System Management Interface (rocm-smi)is the recommended tool forgathering AMD GPU informationfrom the server.
* Option D (Correct):
* sudo rocm-smi -a displaysall available GPU information.
* sudo rocm-smi showsbasic GPU stats.
* Option A (Incorrect):These arenot valid ROCm commands.
* Option B (Incorrect):"rockm-smc" and "rockm-bug.report.txt"do not exist in ROCm.
* Option C (Incorrect):"rocm-gpu" and "rocm-baseboardgpu" arenot standard AMD diagnostic commands.
NEW QUESTION # 22
The syntax and options for the SUM command differ between Windows and Linux.
- A. False
- B. True
Answer: B
Explanation:
TheSUM (Supermicro Update Manager) commandhas differentsyntax and optionsbetweenWindows and Linuxversions.
* OnWindows, the SUM command uses .exe files and standard Windows CLI syntax.
* OnLinux, SUM commands use native Linux paths, shell scripting, and different argument formatting.
For example:
* Windows:sum.exe -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
* Linux:./sum -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
Since syntax differs,the correct answer is True.
NEW QUESTION # 23
What is the executable file extension used in Windows for SUM?
- A. binary
- B. .txt
- C. .sh
- D. .exe
Answer: D
Explanation:
This question is a duplicate ofQuestion No. 20. The correctWindows executable file extension for SUM is .
exe.
* Option A (Correct):SUM on Windows is executed using .exe.
* Option B (Incorrect):.sh is a script file format for Linux, not Windows.
* Option C (Incorrect):.txt files contain textand cannot execute commands.
* Option D (Incorrect):"binary" is not a valid file extension for SUM execution on Windows.
NEW QUESTION # 24
......
Verified SMI300XE Dumps Q&As - 1 Year Free & Quickly Updates: https://testinsides.vcedumps.com/SMI300XE-examcollection.html
