Customer first principles

With the high passing rate of the GB0-371-ENU learning materials and solid relationship with customers, we build close relationship with clients. Our sincere and patient aftersales service is obviously our feature remembered by them for a long time since they finished payment on GB0-371-ENU exam resources. We never meet your needs with aloof manner but treat every customer seriously like families. Because different people have different buying habits, so we designed three versions of GB0-371-ENU practice test questions for you. All of them are usable with unambiguous knowledge up to now and still trying to edit more in the future (GB0-371-ENU learning materials). All these considerations are being added to our services with the Customer first principle as our culture aims.

Concrete contents

We always improve and enrich the contents of the GB0-371-ENU practice test questions in the pass years and add the newest content into our GB0-371-ENU learning materials constantly, which made our GB0-371-ENU exam resources get high passing rate about 95 to 100 percent. So there is not amiss with our GB0-371-ENU practice test questions, and you do not need spare ample time to practice the GB0-371-ENU learning materials hurriedly, but can pass exam with least time and reasonable money. To clear your confusion about the difficult points, our experts gave special explanations under the necessary questions. That means our GB0-371-ENU exam resources are inexpensive in price but outstanding in quality to help you stand out among the average. So you will not squander considerable amount of money on our materials at all, but gain a high passing rate of GB0-371-ENU practice test questions with high accuracy and high efficiency, so it totally worth every penny of it.

With the aim of passing exams and get the related H3C certificate successively, exam candidates have been searching the best exam materials in the market to get the desirable outcome eagerly. We are here to offer help. You do not need to be confused anymore, because our GB0-371-ENU learning materials have greater accuracy compared with same-theme products. So once people make allusions to effective exam materials, we naturally come into their mind. To realize your dreams in your career, you need our GB0-371-ENU exam resources. Now, let us take a look of it in detail:

High-quality exam materials

Our exam materials are of high-quality and accurate in contents which are being tested in real test and get the exciting results, so our GB0-371-ENU exam resources are efficient to practice. With around 20-30 hours practicing process, you will get the desirable grades in your H3C GB0-371-ENU exam. The most important one, we always abide by the principle to give you the most comfortable services during and after you buying the GB0-371-ENU practice test questions. Furthermore, the GB0-371-ENU learning materials will help you pass exam easily and successfully, boost your confidence to pursue your dream such as double your salary, get promotion and become senior management in your company. What are you waiting for, just go for our GB0-371-ENU exam resources.

After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

H3C GB0-371-ENU Exam Syllabus Topics:

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. Regarding the MSTP BPDU format, the correct statement is

A) The MSTI regional root ID is the ID of the bridge with the highest priority in MSTI
B) The same link can have different port path costs in different MSTIs
C) The definition of the Flags field in the MSTI configuration message is exactly the same as the definition of the Flags field in the RST BPDU
D) The length of the root ID field of the MST region is 48 bytes, the upper two bytes are the bridge priority level, the value range is 0-61440, the step length is 4096

2. In the networking shown in the figure, the interconnection lines between RT1, RT2, RT3, and RT4 are all 1000M links except the shared Ethernet part which is a 10M link. The OSPF protocol is run to enable routing to communicate with these 4 routers. Both run PIMSM protocol, RP is 1.1.1.1, receivers are connected to the downstream interfaces of RT1 and RT2, and IGMP is enabled on the corresponding interfaces. Then, when the receiver sends a group join request, which of the following routers are connected (*, G) entry exists?

A) RT1
B) RT3
C) RT4
D) RT2

3. As shown in the networking, SWB and SWC enable STP, SWC is the root, SWA does not enable STP, initially Link 2 is not connected, PCB can send data to PCA, if Link 1 fails at this time, maintenance personnel will link 2 is connected, the statement about the recovery process of the PCB to PCA data transfer service is correct (assuming that the PCA will not actively send data)

A) The SWB port E0/1 enters the Forwarding state to trigger the topology change process, which shortens the MAC address aging time, so the business recovery from PCB to PCA requires a total of 45 seconds by default.
B) SWA port E0/1 will not send TCN BPDUs to SWC after the link is interrupted
C) SWB port E0/1 needs to wait for the default 30 seconds to enter the forwarding state, so the business recovery from PCB to PCA requires a total of 30 seconds by default
D) Since SWA does not enable STP, service recovery needs to wait for the MAC address of SWC to age, which takes 300 seconds by default

4. In the PIM-DM network as shown in the figure, part of the unicast routing tables of routers RT1 and RT2 are as follows:
<RT1>display ip routing-table
Routing Tables: Public
Destination/MaskProtoPreCost NextHop Interface
1.1.1.0/24xxxxP1-1 C1-110.1.1.1Port1
1.1.0.0/16xxxxP1-2 C1-210.1.1.1Port1
<RT2>display ip routing-table
Routing Tables: Public
Destination/MaskProtoPreCost NextHop Interface
1.1.1.0/24XXXX P2-1 C2-111.1.1.1Port2
1.1.1.1/32XXXX P2-2 C2-211.1.1.1Port2
Then, when routers RT1 and RT2 perform Assert, the winner should be

A) If P1-1> P2-1, C1-1<C2-1, then RT1 wins
B) If P1-1=P2-2, C1-1<C2-2, RT2 wins
C) If P1-1=P2-1, C1-1<C2-1, RT1 wins
D) If P1-1=P2-1, C1-1=C2-1, then RT1 wins
E) If P1-1> P2-2, C1-1<C2-2, then RT2 wins
F) If P1-1=P2-2, C1-1=C2-2, then RT2 wins

5. GVRP is enabled on the switch SWA, and the Hold timer value is set to 100 centiseconds. Now you need to modify the value of other timers. The following configuration is correct

A) [SWA-Ethernet1/0/1]garptimer leave 400
B) [SWA-Ethernet1/0/1]garptimer join 50
C) [SWA]garp timer leaveall 415
D) [SWA-Ethernet1/0/1]garp timer join 200

Solutions: